Early Stages of Recrystallization in Equal-Channel Angular Pressing (ECAP)-Deformed AA3104 Alloy Investigated Using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) Orientation Mappings

Early stages of recrystallization in alloys containing complex structure of second phase particles are of considerable practical interest. They were observed for the AA3104 alloy in which large particles occur against the background of randomly distributed dispersoids. The samples were deformed by equal channel angular pressing and then slightly annealed to obtain the state of partial recrystallization. The highly deformed alloy contained a structure of flat grains with the spacing between high-angle grain boundaries ranging from 100 nm to 1 ??m. On annealing, the structure coarsened and got transformed into nearly equiaxed grains by both discontinuous and continuous recrystallization. The nucleation of new grains was observed in statically recrystallized bulk samples using scanning electron microscopy, and during in-situ recrystallization in a transmission electron microscope. Special attention was paid to the nucleation of new grains in areas close to large second phase particles, where a relatively high stored energy was expected to stimulate nucleation. A particular role in the rise of nuclei is attributed to migration of low angle boundaries. During recrystallization at 623 K (350?°C), in most of the observed cases, the growth of grains occurred by coalescence of neighbouring cells and by migration of high-angle grain boundaries. These processes led to nearly equiaxed grains of similar size. Orientation mappings showed that although orientations of new grains were widely scattered, they were not completely random.     

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical properties

Ethylzinc(II ) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,3‐trimethylene carbonate and its copolymerization with ? ‐caprolactone. This initiator allows one to obtain (co)polymers with high molar masses in quite a short time. Significant difference in co‐monomer reactivity and relatively low participation of intermolecular transesterification processes lead to the obtained copolymers being characterized by a gradient chain microstructure. In ¹³C NMR spectra, in all regions, we observed the presence of triads which were distinctly represented by four peaks for the carbonyl signal. Mechanical tests showed that copolymers containing 70% and more of ? ‐caprolactone presented a relatively high Young's modulus and a very high maximum elongation factor; therefore these materials are promising in many biomedical applications. Due to the high reaction rate, we also made an attempt at copolymerization using reactive extrusion which gave promising results. © 2017 Society of Chemical Industry     

N‐Oligo(3‐hydroxybutyrate)‐functionalized polypyrroles: towards bio‐erodible conducting copolymers

New copolymer materials have been prepared by chemical grafting of oligomeric 3‐hydroxybutyric acid (OHB) onto polypyrrole (PPy) derivatives. The influence of grafting density and molecular weight of OHB brushes on the physicochemical properties of prepared copolymers was investigated. PPy substrates were prepared by FeCl₃‐driven oxidative homopolymerization of N‐(2‐carboxyethyl)pyrrole or its copolymerization with pyrrole. The grafting method employed involved controlled anionic polymerization of β‐butyrolactone on pyrrole‐tethered potassium carboxylate active sites. Obtained PPy‐g‐OHB copolymers of varying grafting density and pendant polyester chain length were characterized and the observed structure–property relationships discussed. The impact of real time exposure to phosphate‐buffered saline environment was investigated and the residue products were characterized. Cross‐correlation of spectroscopic, thermal, electrical and elemental analysis data afforded comprehensive evaluation of the structure of prepared materials and their behaviour in hydrolytic medium. Erosion and degradation pathways have been identified, indicating ways to consciously tailor the physicochemical properties of these new biomimetic materials. © 2016 Society of Chemical Industry     

The effects of surface elasticity and surface tension on the transverse overall elastic behavior of unidirectional nano-composites

The effects of surface elasticity and surface tension on the transverse overall behavior of unidirectional nano-scale fiber-reinforced composites are studied. The interfaces between the nano-fibers and the matrix are regarded as material surfaces described by the Gurtin and Murdoch model. The analysis is based on the equivalent inhomogeneity technique. In this technique, the effective elastic properties of the material are deduced from the analysis of a small cluster of fibers embedded into an infinite plane. All interactions between the inhomogeneities in the cluster are precisely accounted for. The results related to the effects of surface elasticity are compared with those provided by the modified generalized self-consistent method, which only indirectly accounts for the interactions between the inhomogeneities. New results related to the effects of surface tension are presented. Although the approach employed is applicable to all transversely isotropic composites, in this paper we consider only a hexagonal arrangement of circular cylindrical fibers.     

The impact of glycated pea proteins on bacterial adhesion

Adhesion is one of the bacterial strategies indispensable for colonization of the small intestine. Food components reaching the small intestine, are not only digested and absorbed there, but may also influence the microorganisms colonizing the mentioned region. In this way, nutrients, particularly the ones the enzymatic degradation of which is hindered, acquire the ability to modify the adhesive potential of the autochthonic microorganisms. The glycated food proteins are noteworthy here for they often undergo relevant structural and functional alterations. Such proteins tend to display a lowered susceptibility to enzymatic degradation and thus may act as modulators of both metabolic activity and adhesive potential of bacteria adhered to the intestinal cells. For that reason, this study aimed at establishing the impact of the glycated pea proteins on adhesion of the bacteria from the genera: Lactobacillus, Enterococcus, and Escherichia, which are typical for the human small intestine.     

Motions of the running horse and cheetah revisited: fundamental mechanics of the transverse and rotary gallop

Mammals use two distinct gallops referred to as the transverse (where landing and take-off are contralateral) and rotary (where landing and take-off are ipsilateral). These two gallops are used by a variety of mammals, but the transverse gallop is epitomized by the horse and the rotary gallop by the cheetah. In this paper, we argue that the fundamental difference between these gaits is determined by which set of limbs, fore or hind, initiates the transition of the centre of mass from a downward–forward to upward–forward trajectory that occurs between the main ballistic (non-contact) portions of the stride when the animal makes contact with the ground. The impulse-mediated directional transition is a key feature of locomotion on limbs and is one of the major sources of momentum and kinetic energy loss, and a main reason why active work must be added to maintain speed in locomotion. Our analysis shows that the equine gallop transition is initiated by a hindlimb contact and occurs in a manner in some ways analogous to the skipping of a stone on a water surface. By contrast, the cheetah gallop transition is initiated by a forelimb contact, and the mechanics appear to have much in common with the human bipedal run. Many mammals use both types of gallop, and the transition strategies that we describe form points on a continuum linked even to functionally symmetrical running gaits such as the tölt and amble.     

Gamma Irradiation Insensitivity of GaAs Schottky Diodes

Guarded Al-and Au-nGaAs Schottky barrier diodes were subjected to Co60 ?-ray irradiation and their electrical characteristics evaluated. These GaAs Schottkys did not exhibit significant change in their I-V and C-V characteristics up to an absorbed dose as high as 1.5 × 107 rads. Diodes that were previously neutron-irradiated with consequent degradation were also subjected to Co60 irradiation, but no synergistic changes were observed.     

Charged polaron-enhanced circular dichroism of optically nonlinear 3-nitroaniline crystal

The circular dichroism (CD) spectra in visible range of the 3-nitroaniline (m-NA) single crystal, of its solution in chloroform, and in the KBr pellet were recorded. Neither the molecular (m or C_s) nor the crystal (mm2 or C_2v) point groups belong to the chiral groups. The DFT calculation of CD spectrum of the m-NA isolated neutral molecule confirmed its chirality. The red shifted bands in the calculated CD spectrum of m-NA radical anion (charged polaron), as compared with the neutral molecule, resemble better the spectra of solids than that of the solution. It seems that these facts corroborate qualitatively the “hop and turn” model explaining the m-NA optical nonlinearity and electric conductivity proposed in Szostak et al. [M.M. Szostak, H. Chojnacki, E. Staryga, M. D?u?niewski, G. B?k, Chem. Phys. 365 (2009) 44-52].     

Synthesis and Characterization of Low Viscosity Dimethacrylic Resin Based on Isosorbide

In this article, synthesis and properties of novel dimethacrylic resin (ISETDMA) based on human friendly, biobased isosorbide was described. Its potential as a possible diluting monomer for medical applications, mainly dental restorative systems was assessed. The resin was obtained in two‐step synthesis including ethoxylation of isosorbide and subsequent methacrylation with methacryloyl chloride. ¹HNMR, FTIR, and electrospray ionization mass spectroscopy (ESI‐MS) techniques were used to identify products. ISETDMA as well as composition with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxypropoxy)phenyl]propane were polymerized using UV initiator IRGACURE 651. Double bond conversion, polymerization shrinkage, water sorption, and sol fraction of resulting polymers were determined. Selected mechanical (flexural strength and modulus, Brinell hardness) and thermomechanical (dynamic mechanical analysis) properties were also investigated. Triethylene glycol dimethacrylate and 2,2‐bis(4‐(2‐methacryloxyethyl‐1‐oxy)phenyl)propane based homopolymers and copolymers were prepared as reference for comparison of particular properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2514–2522, 2013